Rowboat Dock with Winch  The rowboat dock with winch is designed for traditional, pointed-bow rowboats. The rowboat dock makes it easier to pull the boat up to shore and launch it into the water, while also protecting the boat’s bottom from unnecessary dents and scratches.The total length of the rowboat dock with winch stand version is about 7.05 meters and consists of two 2.95 m parts and one 1.15 m part. The dock’s capacity is about 6 meters. The dock can be extended with 2.95 m extension pieces if needed.In addition to the basic structure, the dock includes a winch, rope, pulley, and fastening hook. The basic dock part weighs about 23 kg, and the extension piece about 7 kg. The material is HDPE plastic. The maximum boat weight on the dock is 150 kg.In the winch stand version, the boat is pulled up onto the dock using the winch on the winch stand. The dock operates on a sliding principle, so there are no rollers. The boat slides into place and off the dock on sliding surfaces.Due to the dock’s lightweight design, it’s easy to install in spring, move during the season according to water level changes, and lift off the shore before ice forms.By removing the winch stand from the dock, it’s possible to pull the boat over the dock, for example, to its winter storage location.The dock is delivered in parts, and the customer assembles the dock themselves (instructions included).The rowboat dock with winch is delivered as one unit/package to the postal address. The delivery package size is about 30 x 295cm/ 23kg. Freight is not included in the product price.Maximum dock weight: 150 kg Length: about 7.05 m Width: 100 cm at its widest. Weight: Basic part 23 kg, extension piece 7 kg Material: HDPE plastic Color: black